We’ve included all the equipment needed to setup the DuPont Refill System along with the more common additional spares to keep on hand.

Included are:

• 1 x 30’ GHA KIT (Dispenser Gun, 2 chemical tank on/off valves, 2 in-line on/off valves, 2 x 30’ chemical hoses, 1 wrench)
• 1 x Regulator Kit, 00238107, Attaches to Nitrogen tank (not supplied)
• 2 x 7.5’ Hoses, 00158420, connect regulator to chemical tanks
• 2 x Replacement Tank Filter, 00216151
  
  
• 2 x Dispenser Guns, 00158336 (recommended spare parts)
• 2 x 30’ Chemical Hose, 00158422, used in pairs to extend range of spray hose
• 2 x Hose Couplings, 00259202, (needed to attach extension hoses)

Spray Nozzles

Spray Nozzles came in several patterns and outputs. Each nozzle clips on to the dispenser gun and is the part where the 2 chemicals come together. Because the chemicals start reacting immediately the nozzles become clogged when you stop spraying and are designed to be replaced. Additional Nozzles can be ordered in bags of 25.

Included in this kit are:

• Low GWP Cone Spray Nozzles – Medium Output (White Back), 12030877, Bag of 25
• Low GWP Fan Spray Nozzles – Medium Output (White Back), 12030878, Bag of 25
• Calibration Nozzle – Medium Output (White Back), 00259210, Bag of 25

Note: Calibration Nozzles are required for initial setup to make sure regulator is set correctly.

FROTH-PAK™ Refill Tanks are available in 17, 27, 60, 120 and 350 gallon pairs.

This kit comes with one pair of 120 Gallon Foam Insulation tanks.

• Low GWP FROTH-PAK™ 120 Foam Insulation
• Closed Cell, Class A Fire Rated
• R-Value: 6.1
• Density: 1.75 pcf
• A Tank: Isocyanate - Part # 12066184
• B Tank: Polyol - Part # 12069365
• Theoretical Yield: 16,110 bd ft*

*A board foot (bd ft) is a space 12” x 12” x 1”.

Shipping Weight

• Empty Cylinder: 400 lbs each
• Chemical: 1125 lbs net
• Total Weight Single Cylinder: 1525 lbs
• Total Weight Both A&B Cylinders: 3050 lbs

Full cylinders will ship directly from DuPont. When depleted DuPont will arrange transport to return empty containers for reuse. Full instructions are included with tanks.

What else do I need?

To pressurize the system you need to attach a nitrogen cylinder. This can be rented from a local welding supply company.

Proper PPE (Personnel Protective Equipment) is required for anyone spraying or working in the same area. Please see the Dow video for additional details.

Can FROTH-PAK™ be applied in cold temperatures?

No, FROTH-PAK™ should be applied at typical room temperatures. The cylinders can be stored at slightly cooler temperatures but need to come to room temperature before being applied. At no time should Froth Pak chemicals be allowed to freeze.

Heated hoses and warming blankets are available. Please call us at 888-223-3050 for more information.

What is Personalized Instruction?

When you are about to have your FROTH-PAK™ Refill set delivered, we will arrange to have a DuPont representative contact you and guide you through the setup and initial use of the Refill System.

Click on the links for additional information:

Froth Pak™ Refill Product Brochure

Froth Pak™ Refill Product Information

Froth Pak™ Refill Instruction Manual

Froth Pak™ Refill Calibration

Froth Pak™ Personal Protection Equipment