Sashco

Sashco Through the Roof! One Gallon Can Adhesives, Clear

Sashco Through the Roof! One Gallon Can Adhesives, Clear

$79.89
  • SKU: SAS 14004
  • Availability: Same Day Shipping if Ordered Monday to Friday by 2 PM EST.
  • Shipping: Free Shipping
Availability: Same Day Shipping if Ordered Monday to Friday by 2 PM EST.
In Stock & Ready To Ship!
Current Stock:Only left:
Description

Description:

Sashco Through The Roof Sealant is a premium-quality sealant engineered to provide superior performance and durability, making it the go-to choice for both DIY enthusiasts and professionals.

Features & Benefits:

  • Sticks to wet surfaces
  • Excellent UV Resistance
  • Clear version is 19 times clearer than silicone
  • Gunnable down to 32ͦ F
  • Stick to difficult surfaces
  • Super Elastic – 600% maximum stretch
  • Strong tear resistance
  • Exclusive stop flow feature
  • Freeze-thaw stable in package
  • Water repellent
  • Full 10.5oz in every cartridge
  • Does not support mold and mildew growth
  • Paintable
  • Repairs active leaks
  • Lasts 20x longer than asphalt roof cement
  • Perfect for difficult to find leaks and large coverage
  • Clear version makes an invisible repair, doesn’t crack, craze, or yellow
  • Keep the job going even in cold weather
  • Use on all steep-slope roof materials and fixtures
  • Hangs tough with roof movement
  • Lasts long in the roof environment
  • Less waste, less mess
  • Long 3-year shelf life
  • Sheds water the instant you apply it
  • Unlike silicone, paint sticks with no flaking

Technical Data:

Property Results Test Method
Hardness, Shore A Cartridge grade - 35; Brush grade - 33 (21-day cure) ASTM C661
Slump Cartridge grade - <1/8”; Brush grade - slumps ASTM D2202
Solids Cartridge grade: 57.8% by weight 
Brush grade: 36.0% by weight
Brush grade lower VOC: 45.4% by weight
Cartridge grade lower VOC: 53.1% by weight
ASTM C1250
Extrusion Rate Cartridge grade - 80 g/min (1/8” orifice at 40 psi) Brush grade - N/A ASTM C603
Cured 1 week (dependent on temperature, 
humidity and bead size/thickness)
ASTM C679
Tack-free 30 minutes ASTM C679
Low Temp. Flexibility Pass ASTM C734
Freeze-Thaw Stability Won’t freeze ASTM C731
Adhesion-in-peel Aluminum • Brass • Steel • Copper • Silver

ASTM C794

Recommended Applications:

  • Around common roofing fixtures
  • Galvanized metal and aluminum flashing
  • PVC and ABS vent pipe, skylights, gutters, downspouts,
    ductwork and vents
  • Chimneys, brick, block and mortar
  • Glue down shingles and front edges of flat roof tiles
    (cedar shake, asphalt, cement, slate and glazed tile)
  • Metal RV roofs
  • Roof jacks, cables and air conditioning units

Application Details:

  • Large beads applied in hot weather (above 95ºF) may exhibit slight bubbling. For best
    results, apply out of direct sunlight.
  • Surfaces must be clean and free of frost, loose materials, dust, etc.
  • Prepare frosty or icy surfaces by cleaning with alcohol.
  • Natural shrinkage may give some joints a concave appearance. Multiple applications may be needed to fill the joint flat.
  • If dirt or oils are present on the substrate, wash with any household cleaner, rinse to remove and allow to thoroughly dry.
  • Remove any old caulk, especially silicone, or silicone residue. Use a silicone remover.
  • Close ventilation intakes on roof until solvent dissipates (approx. 12 hours).
  • Flammable during early cure (approx. 24-48 hrs.) Fully cured in 1-2 weeks.
  • Paintable with latex paint/stain in 24 hours or oil-based paint/stain after one week.

Common Substrates:

  • Aluminum
  • Brass
  • Steel
  • Copper
  • Silver
  • ABS
  • Vinyl
  • Lexan®
  • Polycarbonate
  • PVC
  • Fiberglass
  • Nylon
  • Acrylic sheet/Plexiglass
  • Concrete
  • Stucco
  • Mortar
  • Brick
  • Stone
  • Terra Cotta